Sodium-ion Batteries Research Articles

Boosting Molecular Cross-Linking in a Phenolic Resin for Spherical Hard Carbon with Enriched Closed Pores toward Enhanced Sodium Storage Ability.

Phenolic resin (PF) is considered a promising precursor of hard carbon (HC) for advanced-performance anodes in sodium-ion batteries (SIBs) because of its facile designability and high residual carbon yield. However, understanding how the structure of PF precursors influences sodium storage in their derived HC remains a significant challenge. Herein, the microstructure of HC is controlled by the degree of cross-linking of resorcinol-benzaldehyde (RB) resin. We reveal that robust molecular cross-linking in RB resin induced by hydrothermal treatment promotes closed-pore formation in the derived HC. The mechanism is devised for the decomposition of a highly cross-linked RB three-dimensional network into randomly stacked short-range graphitic microcrystals during high-temperature carbonization, contributing to the abundant closed pores in the derived HC. In addition, the high cross-linking degree of RB resin endows its derived HC with a small-sized spherical morphology and large interlayer spacing, which improves the rate performance of HC. Consequently, the optimized hydrothermal treatment HC anode shows a higher specific capacity of 372.7 mAh g-1 and better rate performance than the HC anode without hydrothermal treatment (276.0 mAh g-1). This strategy can provide feasible molecular cross-linking engineering for the development of closed pores in PF-based HC toward enhanced sodium storage.

Exploration of Mixed Polyanionic Compound for Potential High-Voltage Cathode Materials in Sodium-Ion Batteries

Exploration of Mixed Polyanionic Compound for Potential High-Voltage Cathode Materials in Sodium-Ion Batteries

Industrial-scale Hard Carbon Designed to Regulate Electrochemical Polarization for Fast Sodium Storage.

Given the merits of abundant resource, low cost and high electrochemical activity, hard carbons have been regarded as one of the most commercializable anode material for sodium-ion batteries (SIBs). However, poor rate capability is one of the main obstacles that severely hinder its further development. In addition, the relationships between preparation method, material structure and electrochemical performance have not been clearly elaborated. Herein, a simple but effective strategy is proposed to accurately construct the multiple structural features in hard carbon via adjusting the components of precursors. Through detailed physical characterization of the hard carbons derived from different regulation steps, and further combined with in-situ Raman and galvanostatic intermittent titration technique (GITT) analysis, the network of multiple relationships between preparation method, microstructure, sodium storage behavior and electrochemical performance have been successfully established. Simultaneously, exceptional rate capability about 108.8 mAh g-1 at 8 A g-1 have been achieved from RHC sample with high reversible capacity and desirable initial Coulombic efficiency (ICE). Additionally, the practical applications can be extended to cylindrical batterywith excellent cycle behaviors. Such facile approach can provide guidance for large-scale production of high-performance hard carbons and provides the possibility of building practical SIBs with high energy density and durability.

New strategy for structure rearrangement of thin-film composite (TFC) polyamide (PA) membranes and offering potential use in both aqueous and organic solvents

The purity of sodium hexafluorophosphate (NaPF6) is crucial for the preparation of electrolytes in manufacturing. We propose a simple process in order to induce membrane structure rearrangement process (SRP) by activating thin-film composite (TFC) membranes with polyamide (PA) structure and explore their potential green recycling application in concentrating sodium-ion batteries (SIBs) electrolyte. The method utilizes a solution containing polar aprotic solvent as the soaking and activating solution to swell and disintegrate the loosely cross-linked PA layer, and a non-solvent solidification solution complete the SRP, enhancing the permeability of the PA layer while maintaining high rejection rates for divalent ions. Subsequently, during the further treatment of the membrane surface in structure rearrangement, tert-butanol (TBA) is introduced into the aqueous solution to reconstruct the surface PA layer, further improving the permeability. The optimal D8010T10 achieved a permeation flux of 24.2 L m−2 h−1·bar−1, with rejection rates for sodium sulfate (Na2SO4), magnesium chloride (MgCl2), and magnesium sulfate (MgSO4) reaching 94.7 %, 98.4 %, and 99.1 % respectively. And the mechanism of SRP with different solvent is analyzed and explained through dissipative particle dynamics (DPD) simulations. This study provides a commercially viable approach for manufacturing high-performance membranes. The D8010T10 membrane achieves more than 90 % separation efficiency for sodium hexafluorophosphate (NaPF6) dissolved in different solvents, providing a potential solution for the concentration and recovery of NaPF6 in lab-scale, verified its potential use in the organic solvent nanofiltration (OSN) and a path way for waste membrane recycling and degrading use in the industry.

Recent Progress and Prospects on Sodium-Ion Battery and All-Solid-State Sodium Battery: A Promising Choice of Future Batteries for Energy Storage

Recent Progress and Prospects on Sodium-Ion Battery and All-Solid-State Sodium Battery: A Promising Choice of Future Batteries for Energy Storage

An innovative synthesis of carbon-coated TiO2 nanoparticles as a host for Na+ intercalation in sodium-ion batteries.

In this work, an innovative route to synthesize an anatase TiO2@C composite is presented. The synthesis was conducted using a soft chemistry microwave-assisted method using titanium(IV) butoxide as a titanium precursor. The residual (un)converted titanium precursor remaining after TiO2 synthesis was used as a carbon precursor and thermally treated under H2 to obtain nanoparticles of the TiO2@C composite. A superior reversible specific capacity was obtained with TiO2@C (120 mA h g-1 at a C/20 rate, 3rd cycle) compared to that with pristine TiO2 (66.5 mA h g-1 at a C/20 rate, 3rd cycle), in agreement with the importance of carbon coating addition to TiO2 nanoparticles as negative electrode materials for sodium-ion batteries.

Unveiling the Degradation Mechanism of Sodium Ion Batteries based on Na4Fe3(PO4)2P2O7 Cathode and Hard carbon Anode suggests Anode Particle Size Reduction for Cycling Stability

To improve the cycle life of sodium‐ion batteries, it is essential to understand the microscopic processes that lead to cell degradation. The mismatched response time of anode and cathode has profound but poorly understood impact on cycle life. In this research, we combine electrochemical and materials characterization combined with electrochemical modeling to investigate the root cause of degradation in sodium‐ion full cells made from Na4Fe3(PO4)2P2O7 (NFPP) cathodes and hard carbon (HC) anode. Our results pinpoint to the slow diffusion of Na in HC as the main cause of diffusional polarization that leads to cathode experiencing high local potentials and ultimately to active material loss over cycling. We demonstrate that by reducing the anode particle size, the diffusional timescales in anode can be matched with that of cathode to improve both extractable capacity as well as cycle life. These observations shed light on non‐intuitive and intricate ways in which cathode and anode can interact with each other to cause degradation in Na‐ion batteries and how microscopic understanding of these cause and effects can help design long lasting batteries.

High-Entropy Configuration Strategy to Build High Performance Na-Ion Layered Oxide Cathodes Derived from Simple Techniques.

Layered transition metal oxides are commonly used as the cathode materials in sodium-ion batteries due to their low cost and easy manufacturing. However, the application is hindered by poor rate performance and complex phase transitions. To address these challenges, a new seven-component high-entropy layered oxide cathode material, O3-NaNi0.25Fe0.15Mn0.3Ti0.1Sn0.05Co0.05Li0.1O2 (HEO) has been developed. The entropy stabilization effect plays a crucial role in improving the performance of electrochemical systems and the stability of structures. The HEO exhibits a specific discharge capacity of 154.1 mA h g-1 at 0.1 C and 94.5 mA h g-1 at 7 C. In-situ and ex-situ XRD results demonstrate that the HEO effectively retards complex phase transitions. This work provides a high-entropy design for the storage materials with a high energy density. Meanwhile, it eliminates industry doubts about the performance of sodium ion layered oxide cathode materials.

A Comprehensive Review on Strategies for Enhancing the Performance of Polyanionic-Based Sodium-Ion Battery Cathodes

A Comprehensive Review on Strategies for Enhancing the Performance of Polyanionic-Based Sodium-Ion Battery Cathodes

Revealing the potential of graphene-embedded Na3Fe2(PO4)3 for enhanced sodium-ion battery performance

Revealing the potential of graphene-embedded Na3Fe2(PO4)3 for enhanced sodium-ion battery performance

Vacancy-Defect Ternary Topological Insulators Bi2Se2Te Encapsulated in Mesoporous Carbon Spheres for High Performance Sodium Ion Batteries and Hybrid Capacitors.

Ternary topological insulators have attracted worldwide attention because of their broad application prospects in fields such as magnetism, optics, electronics, and quantum computing. However, their potential and electrochemical mechanisms in sodium ion batteries (SIBs) and hybrid capacitors (SIHCs) have not been fully studied. Herein, a composite material comprising vacancy-defects ternary topological insulator Bi2Se2Te encapsulated in mesoporous carbon spheres (Bi2Se2Te@C) is designed. Bi2Se2Te with ample vacancy-defects has a wide interlayer spacing to enable frequent insertion/extraction of Na+ and boost reaction kinetics within the electrode. Meanwhile, the Bi2Se2Te@C with optimized yolk-shell structure can buffer the volume variation without breaking the outer protective carbon shell, ensuring structural stability and integrity. As expected, the Bi2Se2Te@C electrode delivers high reversible capacity and excellent rate capability in half SIB cells. Various electrochemical analyses and theoretical calculations manifest that Bi2Se2Te@C anode confirms the synergistic effect of ternary chalcogenide systems and suitable void space yolk-shell structure. Consequently, the full cells of SIB and SIHC coupled with Bi2Se2Te@C anode exhibit good performance and high energy/power density, indicating its widespread practical applications. This design is expected to offer a reliable strategy for further exploring advanced topological insulators in Na+-based storage systems.

Amphoteric Supramolecular Nanofiber Separator for High‐Performance Sodium‐Ion Batteries

The separator is an essential component of sodium‐ion batteries (SIBs) to determine their electrochemical performances. However, the separator with high mechanical strength, good electrolyte wettability and excellent electrochemical performance remains an open challenge. Herein, a new separator consisting of amphoteric nanofibers with abundant functional groups was fabricated through supramolecular assembly of natural polymers for SIB. The uniform nanoporous structure, remarkable mechanical properties and abundant functional groups (e.g. −COOH, −NH2 and −OH) endow the separator with lower dissolution activation energy and higher ion migration numbers. These metrics enable the separator to lower the barrier for desolvation of Na+, accelerate the migration of Na+, and generate more stable solid electrolyte interphase (SEI) and cathode electrolyte interphase (CEI). The battery assembled with the amphoteric nanofiber separator shows higher specific capacity and better stability than that assembled with glass fiber (GF) separator.

Rational design of hollow C@SnS2/SnS@C cubes with N-doping to realize stepwise sodium storage induced structural stability for highly stable cycling performance

Current application of SnS2-based anodes in sodium-ion batteries fails to meet the demand for higher Na+ storage capacity due to the structural pulverization induced by significant volume changes during cycling. Herein, a novel composite of hollow C@SnS2/SnS@C cubes with excellent diffusion kinetics and structural stability from stepwise Na+ storage is designed. The SnS with gentle pseudocapacitive reaction acts as the self-supporter to prevent the collapse of SnS2/SnS heterostructure during the Na+ insertion/extraction. Together with the clamping of double carbon layers and hollow construction, the volume change caused structural instability in heterostructure is effectively alleviated. The rapid transport of electrons and ions within the built-in electric field of heterostructure endows the composite an excellent diffusion kinetics, which is generated from the narrow bandgap and outstanding Na+ absorption of heterostructure according to the first-principle calculation. Thus, the as-prepared composite maintains a remarkable capacity of 547.9 mAh g−1 after 200 cycles at current density of 0.5 A g−1. Even a capacity of 502.5 mAh g−1 with a low attenuation rate of 0.035 % per cycle is achieved at 2 A g−1 after 1000 cycles. The work proposes an effective approach to achieve effective Na + storage of SnS2-based anodes with long-lasting structural stability.

Precision anode vacancy engineering for long-lasting and fast-charging Na-Ion batteries

In the field of energy storage materials, the unique properties of vacancies are highly significant, especially in the optimization of transition metal dichalcogenides (TMDs). However, scaling up these storage solutions remains a considerable challenge. In our study, we successfully synthesized VSe2-x via alleviating selenide content, where vacancies were introduced in situ through a straightforward physical vapor transport process. These vacancies boost the adsorption capacity for sodium ions (Na+), and create additional active sites, thereby minimizing the structural changes in VSe2-x during Na+ storage. Our VSe2-x based negative electrode demonstrates impressive sodium storage capability, offering an exceptional rate performance with a capacity of 346 mAh g−1 at 5 A g−1 and maintaining a remarkable stability of 378 mAh g−1 even after 1400 cycles at 10 A g−1. Additionally, through a combination of theoretical calculations, in situ X-ray diffraction analysis, and ex situ transmission electron microscopy, we have confirmed the creation of vanadium selenide materials containing vacancies. During continuous charging and discharging, these materials facilitate the generation of numerous sodium-containing aggregates with high electronic conductivity. This paper provides a comprehensive exploration of how vacancies in transformed materials can be an effective strategy for efficient rechargeable batteries.

Tetrathiafulvalene carboxylate-based anode material for high-performance sodium-ion batteries.

Organic electrode materials are promising to be applied in sodium ion batteries (SIBs) due to their low cost and easily modified molecular structures. Nevertheless, low conductivity and high solubility in electrolytes still limit the development of organic electrodes. In this work, a carboxylate small molecule (BDTTS) based on tetrathiafulvalene is developed as anode material for SIBs. BDTTS has a large rigid π-conjugated planar structure, which may reduce solubility in the electrolyte, meanwhile facilitating charge transporting. Experimental results and theoretical calculations both support that apart from the four carbonyl groups, the sulfur atoms on tetrathiafulvalene also provide additional active sites during the discharge/charge process. Therefore, the additional active sites can well compensate for the capacity loss caused by the large molecular weight. The as-synthesized BDTTS electrode renders an excellent capacity of 230 mAh g-1 at a current density of 50 mA g-1 and an excellent long-life performance of 128 mAh g-1 at 2C after 500 cycles. This work enriches the study on organic electrodes for high-performance SIBs and paves the way for further development and utilization of organic electrodes.

Manipulating Local Chemistry and Coherent Structures for High-Rate and Long-Life Sodium-Ion Battery Cathodes.

Layered sodium transition-metal (TM) oxides generally suffer from severe capacity decay and poor rate performance during cycling, especially at a high state of charge (SoC). Herein, an insight into failure mechanisms within high-voltage layered cathodes is unveiled, while a two-in-one tactic of charge localization and coherent structures is devised to improve structural integrity and Na+ transport kinetics, elucidated by density functional theory calculations. Elevated Jahn-Teller [Mn3+O6] concentration on the particle surface during sodiation, coupled with intense interlayer repulsion and adverse oxygen instability, leads to irreversible damage to the near-surface structure, as demonstrated by X-ray absorption spectroscopy and in situ characterization techniques. It is further validated that the structural skeleton is substantially strengthened through the electronic structure modulation surrounding oxygen. Furthermore, optimized Na+ diffusion is effectively attainable via regulating intergrown structures, successfully achieved by the Zn2+ inducer. Greatly, good redox reversibility with an initial Coulombic efficiency of 92.6%, impressive rate capability (86.5 mAh g-1 with 70.4% retention at 10C), and enhanced cycling stability (71.6% retention after 300 cycles at 5C) are exhibited in the P2/O3 biphasic cathode. It is believed that a profound comprehension of layered oxides will herald fresh perspectives to develop high-voltage cathode materials for sodium-ion batteries.

Constructing a Size-Controllable Spherical P2-Type Layered Oxides Cathode That Achieves Practicable Sodium-Ion Batteries.

P2-type layered metal oxides are regarded as promising cathode materials for sodium-ion batteries due to their high voltage platform and rapid Na+ diffusion kinetics. However, limited capacity and unfavorable cycling stability resulting from inevitable phase transformation and detrimental structure collapse hinder their future application. Herein, based on P2-type Na0.67Ni0.18Mn0.67Cu0.1Zn0.05O2, we synthesized a series of secondary spherical morphology cathodes with different radii derived from controlling precursors prepared by a coprecipitation method, which can be promoted to large-scale production. Consequently, the synthesized materials possessed a high tap density of 1.52 g cm-3 and a compacted density of 3.2 g cm-3. The half cells exhibited a specific capacity of 111.8 mAh g-1 at a current density of 0.1 C as well as an 82.64% capacity retention with a high initial capacity of 85.80 mAh g-1 after 1000 cycles under a rate of 5 C. Notably, in situ X-ray diffraction revealed a reversible P2-OP4 phase transition and displayed a tiny volume change of 6.96% during the charge/discharge process, indicating an outstanding cycling stability of the modified cathode. Commendably, the cylindrical cell achieved a capacity of 4.7 Ah with almost no change during 1000 cycles at 2 C, suggesting excellent potential for future applications.

Attention towards chemistry agnostic and explainable battery lifetime prediction

Predicting and monitoring battery life early and across chemistries is a significant challenge due to the plethora of degradation paths, form factors, and electrochemical testing protocols. Existing models typically translate poorly across different electrode, electrolyte, and additive materials, mostly require a fixed number of cycles, and are limited to a single discharge protocol. Here, an attention-based recurrent algorithm for neural analysis (ARCANA) architecture is developed and trained on an ultra-large, proprietary dataset from BASF and a large Li-ion dataset gathered from literature across the globe. ARCANA generalizes well across this diverse set of chemistries, electrolyte formulations, battery designs, and cycling protocols and thus allows for an extraction of data-driven knowledge of the degradation mechanisms. The model’s adaptability is further demonstrated through fine-tuning on Na-ion batteries. ARCANA advances the frontier of large-scale time series models in analytical chemistry beyond textual data and holds the potential to significantly accelerate discovery-oriented battery research endeavors.

A Physics-based Model Assisted by Machine-Learning for Sodium-ion Batteries with both Liquid and Solid Electrolytes

Abstract In the absence of experimental data of a fully developed hierarchical 3D sodium solid state batteries, we developed an improved continuum model by relying on Machine Learning-assisted parameter fitting to uncover the intrinsic material properties that can be transferred into different battery models. The electrochemical system simulated has sodium metal P2-type Na2/3[Ni1/3Fe1/12Mn7/12]O2 (NNFMO) as the cathode, paired with two types of electrolytes have been modeled viz, the organic liquid electrolyte and a solid polymer electrolyte. We implemented a 1D continuum model in COMSOL to suit both liquid and solid electrolytes, then used a Gaussian Process Regressor to fit and evaluate the electrochemical parameters in both battery systems. To enhance the generalizability of our model, the liquid cell and solid cell models share the same OCV input for the cathode materials. The resulting parameters are well aligned with their physical meaning and literature values. The continuum model is then used to understand the effect of increasing the thickness of the cathode and current density by analysing the cathode utilization, and the overpotentials arising from transport and charge transfer. This 1D model and the parameter set are ready to be used in a 3D battery architecture design.

Solid-Solution Reaction and Ultrasmall Volume Change in High-Entropy P2-type Layered Oxide Cathode for All-Climate Sodium-Ion Batteries

Solid-Solution Reaction and Ultrasmall Volume Change in High-Entropy P2-type Layered Oxide Cathode for All-Climate Sodium-Ion Batteries